Відео

I was a loyal Traeger+ user for years, but after switching to Asmoke, I have to say the difference is clear. The precise temperature control that Asmoke offers is just amazing. The dual sensors and the new PID algorithm ensure temperature control within 5°F which makes grilling so much easier. Additionally, the portability of this grill with its lightweight, compact design is a game changer. I can now enjoy grilling on my camping trips without any hassle. I also appreciate the eco-friendly aspect of the wood pellets used as a fuel source, and the variety of flavors available add an extra layer of deliciousness to my grilling. Grilling has never been more enjoyable and efficient. I am so glad I made the switch to Asmoke. #Asmoke

The preloaded lead nuts are used improper, the sprung load should be forcing down with gravity. Instead they have the springs on the bottom pushing up, so the weight of the bed is resting on the springs instead of resting on the screw with the springs giving extra help driving the bed weight to the screw. Unfortunately I have seen all China printers using these in this manner and it is wrong. This may be the reason the mesh bed is so bad looking as constant up and down could pose the variability, but being high in the middle could be do to trapping the corners and heating it up do to thermal expansion. But what do I know I only designed AM for NASA, SPACE X, and BLUE ORIGIN!

John, good review! I'm amazed how much resin printer prices have dropped and the quality seems to have gone up. I sill don't have a need for them, and am very concerned about using resin, but do appreciate the information.

I bought this for my CR-10 Max and the fan shroud seems to have a special left hand mounting which won't let me install any of the recommended CR-Touch brackets STL's to print out... I am feelings a bit clueless, also for the filament sensor, no help in instructions for that...

thanks for your great review :)

Based on the other reviews I've seen, I agree that your unit was probably defective. I'm glad Elegoo is eager to replace it. One thing I wanted to remark on is that I would avoid inverting the build plate to keep any resin drippings from contacting the upper part of the the mechanism. Thanks for the review!

Well, done Mr. tripod keep it up. You are awesome, but bear is even more awesome.

The little guy with the MRRF logo almost made it back with no issue, but nothing a little glue couldn't fix! Thank you again for that!!!

Xtool have a product exchange but just $200 for my F1 which I a. Still paying monthly 🤦🏻🫣

I would use riser to do panels for my granddaughters treehouse if your giveaway is still going on. I have the S1 but need riser base to do deeper jobs. I have conveyer but need more room to use.

How far does the PTFE tube go down into the hot end compared to the original hot end.

Unless you know whats under the blacktop no body can say whats going to need to be done i think the crew did good your blacktop failed because the base was crap now you got good base with 3 inch of blacktop it should last your lifetime

Hey! I was trying to dee your PMAG settings but for some reason my phone shows it really grainy. Could you share your settings? Id like to make my marine husband something haha😊

I was smacking my rotors for like 3 hours,so glad I found your video. I used a small bolt and nut initially and broke it and was stucked in there so I end up cutting it with a hack saw. I then used the bigger bolt and nut 12 mm and it came out easy. Thanks a lot and a new subscriber to your channel 👌

If something goes wrong don’t expect help from Ikier. The manuals are written by someone that doesn’t know what they’re talking about. They’ll string the conversation out till you have exceeded your frustration level. Then blame another department for failure to honor the Ikier warranty.😫

I think you ripped them off. You probably paid a cheap price had all that equipment out there and men power as well. They put you two different types of stone and used a paving machine on that small driveway. You watched them and took videos of the job. And then you put a video up asking if you got ripped off. It’s hot rocks oil and sand. That’s all asphalt is. What did u expect Driveway is probably the cheapest thing you could do to your house. $5-7 k for a 15 year investment that gets drove on multiple times a day from cars and trucks that weigh between 4-7000 pounds. Driveway sits out in the rain , cold , heat , frost , snow. Etc. people change their oil on it birds and pets pee or crap on it car drips gas and oil on it. What do people expect that’s less than 1 dollar a day over 15 years. You spend more than that on coffee every morning

Works perfectly. Took me 2 minutes to take the rotor off. A big thank you!!!

See that 7.20 mark - I dont like the design of the plate - the way resin is in the gap of the plate and you are bound to drop it some time. Why could they not have covered that gap and put a wing on it to hold it more securly. Its really put me off this machine.

I saw you at the 3d festival:)

Weird those settings are not working for me 10% won't even touch the PMAG

Can you share the settings? Thank you

Cutting wood is........smoking all the house....😒

What DPI are you using cause it says it’s going to take 6 hours.

You Sir, are my hero 😎 It worked like a charm 👍

Hi i have this printer but it's impossible print with cura a lots of problems please anyone can help me to manage it ?? normally i hav an ender 3 and a Flsun q5 and no problems with those printers but this one .... orrible , problems , problems , problems !!! please help meeeee !!!!

I do this with bolts both bracket holes at the same time and I seldom have to turn the rotor to break it fully free. My issue is my bolts mar so it’s hard to put the nuts on them to reuse. I guess I’ll have to look for harder ones.

this is cool, what software are you using to do the computer text graphics when you were unboxing?

I spent 2 hrs hammering got nothing, this method took me 30seconds, you are genius😂😂😂

Can I ask where you get your pet tag blanks?

buen video me as solucionado algunas dudas q tenia ,muchas gracias y nuevo sub ;) saludos desde españa

Broo u saved my day. Will always remember this. Thanks so much

Check your boxes because some certain boxes may feel light, but it has the drip tray in it

Awesome . Have you tried to do a photo reproduction or carving or 3 d with this Ikier ? I'm wondering if i can do a good photo reproduction . Thanks

Hello. I bring planning for driveways, SO one'd have a clear, good looking, planned shape for the asphalt, concrete, bricks or whatever material a customer would prefer. So a plan is first produced. (Where you're able to see the output driveway before hand, specifying all the dimensions aspects for a driveway. God give gift people. Here to stay

Thank You Very much for this info. I have been beating on a rotor for 30 minutes straight with a 5 lbs. hammer and did not move. Tried your nut and bolt trick. Less then 1 minute it was off. Took longer to find the nut and bolt... Nut and bolt now has been add to the tool box. You are the man!

Great video! Thank you.❤

It seems like they rushed all of their neptune 4 printers to market, expecting the users to fix all of the issues. You are just buying hardware at this point. Can it actually give you reliable prints? Who knows!

🎉❤😅😮😢🎉😂❤

Is it compatible with Lightburn?

Wish u showed more detail. Like the settings etc.. I cannot get anything right so far. But thanx for showing off. 😅. Well done.

Bought this printer last fall and got it all set up except the input shaping and external screen. soon I’ll have those done too thanks to your helpful video., appreciate your efforts!

What are the advantages of 70W power over 30W power?

Well done！There are many dual laser engraving machines on the market now. acmer p3 looks pretty good too, will you test it?

It's nice to get an honest review. Thank you.

I would be highly embarrassed sitting there watching men working saying that I didn't see anything wrong with the whole job pretty good job and surprised to see them using a paving machine for such a small area that's a lot of extra cost to haul them machines around you would not get that job done today for 4300 it would cost more like 7000

Thank you, you just saved me beating my head against the wall!

21:10 You should fix that. Should be "Lets" not "Let's". "Let's" means "Let is".

do you think I could engrave text into rocks? feldspar, quartzite and such, 0.2mm depth

Nice review John, especially since you call out the settings on each engraving!